...

In the Mass Calculation entity, which is a subgoal of the total solution, the mass and the centre of gravity of the whole system will be calculated. These quantities depend on the mass and centre of gravity of both the ship itself (Light Ship Weight) and the cargo it carries (Mass Cargoes). The total mass is calculated by the summation of all mass components. The centre of gravity of a system of components is defined as the average of their positions, weighted by their masses. This method is used at every level (entity/subgoal) of Mass calculation.

At the level of entities In the entities Mass Calculation and Light Ship Weight (and Mass Cargoes) no input is requested from the user.The first 'stop' in the calculation process is in Mass hull.

• If you have not done so already in the previous part of this tutorial, click Next. In any case, the screen should now look like this:

...

Quaestor will calculate all information in these entities when all required information from lower entities is available. You can see this because these entities are still colored red. A yellow cell will be calculated by a relation.

Based on the results of the entities Main Dimensions and Hydrostatics (in Ship design | Lay out | Hull), the centre of gravity and volume of the hull is determined. Scroll through the parameter list to see the used relations in the Explanation window. For this simplified ship configurator it is assumed that the mass of the hull can be computed by:

Mass = Weight_volume_factor * Volume

As a user, you only have to provide a weight volume factor. The moments around the X, Y and Z axis are determined by Mass multiplied by respectively COGX, COGY and COGZ.

...

In the previous section, you defined the names and positions for two decks. Entity The entity Decks presents a table which contains a number of parameters for each defined Deck.

...

The centre of gravity of a deck is based on the given location in your ship design. For this simplified ship configurator, it is assumed that the mass of the decks can be computed by:

Mass = Weight_area_factor * Area

As a user, you only have to provide a weight area factor for each deck. The mass calculation as applied for decks is also used for the mass calculation of bulkheads.

...

• Click Next and enter the values 0.22 [t/m²] and 0.23 [t/m²] for the Weight_area_factors of the bulkheads and press Enter.

That The last thing to do for the mass calculation is entering data for the cargo objects. You'll know how to do this. For this tutorial, limit yourself to a few objects, because otherwise you will have a lot to enter! Note that there is a picture of the coordinate system to help you in the Explanation window. For two pieces of cargo, the input will look something like this:

2    2    Intact stability calculation

The mass and centre of gravity of the whole system are input for the intact stability calculation. For this tutorial a very unrealistic simplified stability |Co calculation is developed. The moment of area inertia of the waterline water plane area is the only required input value.

Entity “The entity Intact stability” is only included to give an idea how a configurator can be build built with a taxonomy approach. Example input values for Entity “the entity Intact stability” is presented in Figure 28.

Image Removed

Figure 28: Intact stability calculation

...

are presented below:

Image Added

3    Data to Word report

At the moment you leave Entity “the entity Intact stability” with the "Accept input & Continue" button  Next button, Quaestor jumps automatically in Entity“Data to the entity Data to Word report”report. In here Here you do not have to provide any input values. Quaestor will directly generate (if all information from the previous Entities entities is available) a little MS Word report. When you have this document open at that moment, you will see the generation of the reports taking place on your screen.Please be

There are two ways to open the created Word documented from inside Quaestor.

• Select the parameter Report_document$ in Entity “Example report” and click the entity Example report and click on “Click here for value” in ” in the Explanation window below “Name, value dimension & dimension”group”.
• Double click on the report name behind the click on the value of parameter Report_document$ (in Figure 29 “Report_151212_2.doc”).

FinallyOf course, it is always possible to find and open the document in your project folder on your computer. The example report document is built up from two sub documents (two chapters) that also can be watched / opened separately. Image Added

Image Removed

Figure 29: Generation of example MS Word report

...

Image Added

4    Data to Excel

The main dimensions and a table of deck data will also be will be written to an Excel file too. In here Here, the total deck area will be calculated and the result will be send back to Quaestor in parameter “Total_deck_area”, see Figure 30area. If Quaestor knows all the required data, the Excel file will be made at the moment you are in Entity “Data to Excel”.Please note that the visit the entity Data to Excel.

...

...

...

There are two ways to open an Excel file from Quaestor.

• Select the parameter File_name_Excel$ in Entity “Data to Excel” and click the entity Data to Excel and click on “Click here for value” in ” in the Explanation window below “Name, value dimension & dimension”group”.
• Double click on the Excel file name behind the parameter click on the value of parameter File_name_Excel$ (in Figure 30 “Deck_data_153402.xls”).Excel$.

Image Added

Image Added

Of course Finally it is always possible to find and open the document in your project folder on your computer .

Image Removed

Figure 30: Data to Excel(The default path for the Ship_configurator is C:/Users/Public/Documents/My_Knowledge/Projects/_Ship_configurator/Solutions).

...